Product Features
Three remote functions: telemetry (including direct flow), remote signaling, and remote control;
Protection functions: three-phase three-section overcurrent protection function, zero sequence protection function, reclosing and blocking reclosing function;
Intelligent distributed logic function: achieving local fault clearing, automatic fault isolation, automatic transfer of power supply, and automatic restoration of power supply in non faulty sections; Logic manual, automatic reset and other functions;
Remote/local operation: The remote/local closing and opening operations are mutually locked, and the control outlet is controlled by the soft and hard pressing plates for on/off;
Power function: Dual power switching, automatic seamless switching to backup power supply in case of AC power loss, and automatic management (battery activation, alarm, protection) function for backup power supply;
Communication function: multiple network and serial ports, supporting multiple communication protocols; Wireless communication: capable of wireless communication through touch laptops;
Wireless communication: capable of wireless communication through touch laptops;
Status indication: There are obvious local status indication signals for operation, communication, line faults, etc;
Data processing function: arbitrary configuration and combination of data sent by the main station; Distribution transformer load rate, three-phase imbalance, remote sensing exceeding limit, extreme value, qualification rate statistics, etc;
Fault detection: achieving on-site fault clearing, automatic fault isolation, automatic transfer of power supply, and automatic restoration of power supply in non fault sections; Logic manual, automatic reset and other functions;
Technical parameter
Telemetry
|
Rated voltage
|
AC220V/100V, accuracy ≤ 0.5%
|
Rated current
|
5A/1A, accuracy ≤ 0.5%
|
Power (active, reactive, power factor)
|
≤ 1%
|
DC voltage
|
Accuracy ≤ 0.2%
|
Remote signaling
|
Remote signaling power supply
|
DC24V/DC48V adaptive
|
SOE resolution
|
≤ 2ms
|
Software anti shake time
|
0-65535ms can be set
|
Single/dual point remote signaling optional
|
|
Remote control
|
Output method
|
Empty contact output, pulse duration 1-65535ms can be set
|
Contact rating
|
AC 250V/5A, DC 80V/2A, or DC 110/0.5A pure resistive load
|
Contact life
|
On/off ≥ 105 times
|
Telemetry
|
Ua, Ub, Uc, U0 (or Uab, Ubc), Ia, Ib, Ic, I0 (or synthetic), 1 DC quantity
|